Product ID:ITW RAMSET EPCON SYSTEM RESIN
MSDS Date:06/21/1992
FSC:8040
NIIN:00F039251
MSDS Number: BYJBM

ITW PHILADELPHIA RESINS CORPORATION

130 COMMERCE DRIVE
MONTGOMERYVILLE, PA 18936
US

Emergency Phone: 215-855-8450

Info Phone: 215-855-8450

Cage: ITWPH

ITW PHILADELPHIA RESINS

454 MONTGOMERYVILLE, PA 18936 US

Telephone: 508-777-1100

Cage: ITWPH

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: >60%

CATALYST AMORPHOUS SILICA, DI-ME SILOXANES & SILICONES

CAS: 67762-90-7

Fraction By Weight: 1-5%

TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 5-10%

OSHA PEL 2 MG/CUM (RESP DUST)

ACGIH TLV: 2 MG/CUM (RESP DUST)

TITANIUM DIOXIDE, TITANIUM OXIDE (SUSPECTED ANIMAL

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 1-5%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

GLASS OXIDE, FIBER GLASS WOOL, LEAD BOROSILICATE GLASS

CAS: 65997-17-3

Fraction By Weight: 5-10%

LD50 LC50 Mixture:ORAL LD50(RAT): 11.4 G/KG EPOXY RESIN
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MODERATELY IRRITATING & MAY
CAUSE SENSITIZATION. EYES: MODERATELY IRRITATING.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, RASHES, HIVES.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN ALLERGIES.
PRE-EXISTING SKIN & EYE DISORDERS.

First Aid:EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN:
WIPE & FLUSH W/PLENTY OF WATER FOR 15 MINS. USE SOAP/FOLLOW BY
WASHING W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR & PROVIDE
OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES. NOTE TO PHYS: IN GENERAL, EMESIS INDUCTION
IS UNNECESSARY IN HIGH VISCOSITY, LOW VOLATILITY PRODUCTS.

Flash Point:>250F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE SCBA & PROTECTIVE CLOTHING.

Spill Release Procedures:AVOID PERSONAL CONTACT. TAKE UP W/ABSORBENT
MATERIAL. PLACE IN A SUITABLE CONTAINER FOR WASTE DISPOSAL.

Handling and Storage Precautions:STORE IN A COOL DRY PLACE W/ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAME & HIGH TEMPS.
Other Precautions:AVOID SKIN CONTACT & BREATHING OF VAPORS. HANDLE IN
ACCORDANCE W/THE HAZARD POTENTIAL OF CURING AGENT.

Respiratory Protection:DUSK MASK SHOULD BE WORN DURING ANY
GRINDING/MACHINING PROCEDURES ON CURED RESINS.
Ventilation:GENERAL: GOOD GENERAL IS ADEQUATE FOR MOST INDUSTRIAL
APPLICATIONS. LOCAL EXHAUST: IN CONFINED AREAS/EXCEEDS TLVS.
Protective Gloves:REQUIRED
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:CHEMICAL RESISTANT/IMPERVIOUS
RUBBER/PLASTIC, CLEAN LONG LEG & SLEEVED CLOTHING.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
WASH THOROUGHLY AFTER HANDLING & BEFORE SMOKING, EATING/USING TOILET
FACILITIES.

Spec Gravity:1.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE W/MILD EPOXY ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & STRONG LEWIS/MINERAL ACIDS.
Stability Condition to Avoid:OPEN FLAME, HIGH TEMPS.
Hazardous Decomposition Products:CO2, CO, ALDEHYDES, ACIDS.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.